The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB-to-Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.

A separate power-over-Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.

Compatible with PoE Module 12V (X000002).

Technical specifications

Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limit) 6-20V
Digital I/O Pins 14
PWM Digital I/O Pins 4
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB
Flash Memory for Bootloader 0.5 KB
SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Lenght 68.6 mm
Width 53.3 mm
Weight 28 g

 

Write a review

Note: HTML is not translated!
    Bad           Good

Arduino Ethernet Rev3 WITHOUT PoE

  • Brand: Arduino
  • Product Code: Arduino Ethernet Rev3 WITHOUT PoE
  • Availability: In Stock
  • AED 195.00


Specials

BeeProg2C

BeeProg2C

  extremely fast programming, one of the fastest programmers in this category. ..

AED 3,450.00 AED 3,900.00

FIRE/OVERHEAT DETECTOR  PN: 3601-39-800/450-4

FIRE/OVERHEAT DETECTOR PN: 3601-39-800/450-4

FIRE/OVERHEAT DETECTOR  PN: 3601-39-800/450-4SYSTRON DONNER..

AED 0.00

SmartProg2

SmartProg2

small, fast and powerful universal programmer DIL40 ZIF socket, devices in DIL package ..

AED 1,900.00 AED 2,200.00