The BeeProg3 is an ultra-speed universal 64-pin drive programmer designed for high-capacity memory programming. It is meticulously designed with attention to details, quality, and reliability, making it suitable for both high-demanding desktop programming and automated programming systems. It features state-of-the-art FPGA design, a powerful ARM processor, and an internal SSD, making it capable of programming devices at theoretically possible speeds. The BeeProg3 supports devices with VCC voltages as low as 0.8V and offers a wide range of rich features, including precise and powerful pin drivers with logic signal frequency up to 125MHz at 3.3V and 80MHz at 5V.

Bullet Points:

Designed with meticulous attention to details, quality, and reliability
Suitable for high-demanding desktop programming and automated programming systems
State-of-the-art FPGA design, powerful ARM processor, and internal SSD
Supports devices with VCC voltages as low as 0.8V
Ultra-fast programming speed, one of the fastest programmers worldwide
Sustainable programming speed greater than 31 MBytes per second
8 GB eMMC NAND Flash programming can be done in less than 250 seconds (if supported memory is fast enough)
Utilizes both universal programming modules and specialized modules optimized for specific device families
ESD protection on each pin of the pin driver
Dual connection to the PC: USB (2.0 HighSpeed) and LAN (100 Mbit)
Comfortable and easy-to-use control program, compatible with all versions of MS Windows from Windows XP to Windows 11 (32-bit and 64-bit)
Quick reaction to customer’s needs with OnDemand software for software updates
Multiprogramming possible by attaching more programmers to one PC
Developed and made in Slovakia
Warranty of 3 years
Approved by CE laboratory to meet CE requirements
PC System Requirements:
Common, software-related requirements:

Programmer hardware related requirements: either one USB port (2.0 compatible) or one LAN port
Operation:

Operating voltage: 100-240V AC rated, 90-264 VAC max., 47-63 HZ
Power consumption: max. 25W active, about 5W sleep
Dimensions: 139.5 x 189.5 x 48.5 mm (5.5 x 7.5 x 1.9 inch) (measured without programming module inserted and does not include projections; total height of BeeProg3 programmer with programming module inserted depends on height of ZIF socket on the module and can vary between 66-78 mm)
Weight of programmer without programming module: 1.25kg (2.75 lb)
Operating temperature: 5°C ÷ 40°C (41°F ÷ 104°F)
Operating humidity: 20%..80%, non-condensing
Package Includes:

BeeProg3 programmer
Power cord (Europe / USA / Japan)
Connection cable PC-programmer, USB port
Diagnostic pod for self-test of the programmer and test of the calibration (AP3 diagnostic pod, 1x)
Programming module fixating screw (1x)
AP3 anti-dust cover (1x)
Quick start guide
CD with software and user’s manual
Calibration test report
Sticker “register your programmer” (1x)
Information leaflet “Notes about ESD” (1x)
Transport case (cardboard box)