• GDS-1102  |  100MHz 2-Channel Digital Oscilloscope

Features

  • 100 MHz Bandwidth
  • 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
  • 4k Memory Length per Channel
  • Peak Detect as Fast as 10ns
  • Save/Recall of 15 Front Panel Settings & Waveforms
  • 5.6" TFT Color Display
  • 19 Auto Measurements
  • Math Operators - Add, Subtract, FFT
  • 6-Digit Real-Time Frequency Counter
  • Timebase Range: 1nS ~ 10nS/div
  • USB Port for PC Connection
  • 2 Input Channels


     


Specifications



Vertical
Channels 2
Bandwidth DC ~ 100MHz (-3dB)
Rise Time <3.5ns Approx.
Sensitivity 2mV/div ~ 5V/div (1-2-5 increments)
Accuracy ?(3% x |Readout|+0.1 div + 1mV)
Input Coupling AC, DC & Ground
Input Impedance 1M?2%, ~16pF
Polarity Normal & Invert
Maximum Input 300V (DC+AC peak), CATII
Waveform Signal Process + , - , FFT
Offset Range 2mV/div ~ 50mV/div : ?0.4V
100mV/div ~ 500mV/div : ?4V
1V/div ~ 5V/div : ?40V
Bandwidth Limit 20MHz (-3dB)
Trigger
Sources CH1 , CH2 , Line , EXT
Modes Auto, Normal, Single, TV, Edge, Pulse Width
Coupling AC , DC , LF rej. , HF rej. , Noise rej.
Sensitivity DC ~ 25MHz : Approx. 0.5div or 5mV
Ext Trigger
Range ?15V
Sensitivity DC ~ 30MHz : ~ 50mV
30M ~ 60MHz : ~100mV
Input Impedance 1MΩ?2% , ~ 16pF
Maximum Input 300V (DC AC peak) , CATII
Horizontal
Range 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div
Modes Main, Window, Window Zoom, Roll, X-Y
Accuracy ?0.01%
Pre-Trigger 10 div maximum
Post-Trigger 1000 div
X-Y Mode
X-Axis Input Channel 1
Y-Axis Input Channel 2
Phase Shift ?3? at 100kHz
Signal Aquisition
Real-Time Sample Rate 250MSa/s maximum
Equivalent Sample Rate 25GSa/s maximum
Vertical Resolution 8 Bits
Record Length 4K Dots maximum
Acquisition Mode Normal, Peak Detect, Average
Peak Detection 10ns (500ns/div ~ 10s/div)
Average 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256
Cursors & Measurement
Voltage Measurement Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot
Time Measurement Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
Cursors Measurement Voltage difference between cursors (ΔV)
Time difference between cursors (ΔT)
Auto Counter Resolution : 6 digits
Accuracy : ?2%
Signal Source: All available trigger source except the Video trigger mode
Control Panel Function
Autoset Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level
Save Setup Up to 15 sets of measurement conditions
Save Waveform 15 sets of waveform
Display
TFT LCD Type 5.6 inch
Display Resolution 234 (Vertically) x 320 (Horizontally) Dots
Display Graticule 8 x 10 divisions
Display Brightness Adjustable
Interface
USB Slave Connector USB1.1 & 2.0 full speed compatible (printers and flash disk not supported)
SD Card Slot Image (BMP), waveform data (CSV), and setup (SET)
Power Source
Line Voltage Range AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection
Miscellaneous
Multi-Language Menu Available
Online Help Available
Accessories User manual x 1
Power Cord x 1
GTP-060A-2 Probe(10:1/1:1) x 2
Dimensions & Weight 310(W) x 142(H) x 140(D)mm
Approx. 2.5kg
Warranty Limited Lifetime
 

 

Write a review

Note: HTML is not translated!
    Bad           Good

GDS-1102 | 100MHz 2-Channel Digital Oscilloscope

  • Brand: Gw-Instek
  • Product Code: GDS-1102
  • Availability: In Stock
  • AED 3,400.00


Specials

BeeProg2C

BeeProg2C

  extremely fast programming, one of the fastest programmers in this category. ..

AED 3,450.00 AED 3,900.00

FIRE/OVERHEAT DETECTOR  PN: 3601-39-800/450-4

FIRE/OVERHEAT DETECTOR PN: 3601-39-800/450-4

FIRE/OVERHEAT DETECTOR  PN: 3601-39-800/450-4SYSTRON DONNER..

AED 0.00

SmartProg2

SmartProg2

small, fast and powerful universal programmer DIL40 ZIF socket, devices in DIL package ..

AED 1,900.00 AED 2,200.00